BuildSim-Nordic 2022, Copenhagen
(leave this line blank)
Firstname Lastname1*, Firstname Lastname2, Firstname Lastname2
1Institution 1, City 1, Country 1
2Institution 2, City 2, Country 2
- corresponding author: author@mail.com
(The names and affiliations SHOULD NOT be included in the draft submitted for review)
(leave blank up to line 10 – remove line numbering from final version)
Abstract
This document explains how to prepare a paper for submission to the BuildSim-Nordic 2022, Copenhagen. It also includes the instructions for submission. This file can also be used as a template if you are using MS-Word. In this case you can use the defined styles in the Style Gallery to format the headings and paragraphs in the document.
Introduction
In this section, we describe the general layout of the paper. The paper should be prepared in A4 size, portrait oriented, with 25 mm margins at top and bottom, and 20 mm margins at left and right. Times New Roman should be used for the entire document with different style at different part of the paper, as explained in following sections. The required number of pages for submission is 6 to 8 pages. Please do not add page numbers, headers or footers.
The paper includes 2 parts (upper part and the main body) with different subparts and sections. Mandatory – in bold – and optional sections (recommended but not limited to) are:
Top part
• Title
• Authors
• Authors’ affiliations
Main body
• Abstract
• Introduction
• Methods
• Results
• Discussion
• Conclusion
• Aknowledgments
• Nomenclature
• References
Optional parts can be replaced according to the needs but the order should be preserved.
Second level paragraphs are acceptable. Lower level paragraphs are discouraged.
Do not leave empty lines between titles, paragraphs and figures in the main body. Use paragraph spacing above and below titles and paragraphs as specified in the following.
In case you use MS-Word, you can refer to the predefined styles in the gallery included in this template (in alphabetical order):
• Authors
• Captions
• Equation
• Figure
• List (bulleted)
• List (numbered)
• Heading 1
• Heading 2
• Normal
• Reference
• Tables
• Title
Parts of the paper:
Upper part
The upper part of the paper on the first page is used for the title of the paper, list of authors, and authors’ affiliation. This section always consists of 10 lines of exactly 14 points spacing, in single column format as also explained in the upper part.
Title, authors, and authors’ affiliations
Titles (you can use the Titles style in words) should be in bold font size 12 points. Do not use more than 2 lines for the title, and try to limit it to ten words. Authors (you can use the Authors style in word), authors’ affiliations, and other information should be in font size 12 points. In case of more than one affiliation, reference superscripts after the author’s names and before the corresponding affiliation will be added as shown.
Authors’ affiliations (always in Authors style), can include contact (e-mails, telephone numbers, postal address, etc.). However, the 10 lines limitation applies. If you need less than 10 lines for all the information, please leave the remaining lines blank.
Main body
The rest of the document, which is the main body of the document, is configured in two-column format, with a space of 80 mm between the two columns. The space between the columns should be centred on the paper. Line spacing is exactly 12 points.
Figure 1: A gentle reminder.
The main text should be typed in 10-point font, justified, with 3 points spacing below each paragraph (you can use h the Normal style in word).
The headings of each section should use font size of 12 point, capitalized, with 3 and 3 points spacing above and below (select Heading 1 style). The headings of the subsection should use 10 points size and bold style, with 3 points spacing below (select Heading 2 style). Left alignment is used for headings. Both the sections and subsections should not be numbered.
Abstract
The abstract of the paper should be about 100 words.
Abstracts must clearly identify (i) what is the current state of the art, (ii) what are its deficiencies, (iii) what methods have been applied, (iv) what are the results, and (v) what is the lasting contribution of the submission.
Figures and Tables
Figures and Tables are preferably included in the text where they are discussed. In the case of figures, select the “In line with text” from the layout options if you use MS-Word. A centred alignment with 3 and 3 points spacing above and below is required (you can use Figure style in word).
Both figures and tables must have a number and caption. Figure 1 (refer as just stated to a figure in the text)) is an example of a graph in the text. Captions (use Captions style) always follow the figure in italic font size 10 points, and centred, with 3 and 3 points spacing above and below.
If figures authorship does not belong to one of the authors, authors are required to ask to the copyright owner the permission to use that material and to provide a proof that the permission has been accorded.
Colour images are welcome.
Table 1 shows an example of a table, where the caption should be on the top of the table, with the same format as figure captions. Text in tables can be in font size of 9 points and centred, with no spacing above and below (use Tables style). Oversized figures and tables may be included in the text. However, authors may arrange the layout properly so that it appears at the top or the bottom of the page, or preferably on a separate page at the end of the paper. Figure 2 is an example of an oversized figure.
Equations and units
Each significant equation or formula should be displayed on a separate line. Centre equations and place consecutive equation numbers flush right in parentheses. For example,
a2 + b2 = c2 (1)Table 1: Example of a table.
Heading 1 Heading 2 Heading 3
Entry 1 Entry 2 Entry 3
If you use MS-Word, use the Equation style and use tabs to position equations and equation numbers correctly.
Mathematical symbols should be clear and avoid ambiguities. Keep using font size 10 points. Symbols representing physical quantities (or variables) are italic. Symbols representing units, operators, labels and numbers, are regular (upright).
Equations should be referenced in the text by their number (1). A brief description of the symbols used in your paper should be added in a nomenclature section at the end of the text or in line with the text where the symbols are first used.
SI units of measurement are mandatory. If other units are mentioned, always provide their equivalent value according to SI.
References
All publications cited in the text should be listed at the end of the Main body in a References section, in alphabetical order of the family name of the first author. From the second line on, each entry should be indented by 5 mm. Justified alignment with 3 and 3 points spacing above and below each paragraph must be used (you can use Reference style in word). Examples of reference style are reported in the reference section below for journals, conference proceedings, books and technical standards.
Bulleted and numbered lists
Numbered and bulleted lists must be justified, with no indentation, and 5 mm hanging. You may use List (bulleted) or List (Numbered) styles in MS-Word.
If you use MS-Word
You can use the .dotx document as a template if you use MS-Word. Please use the style for each section as has been defined in the template.
If you use MS-Word
You can use the .dotx document as a template if you use MS-Word. Please use the style for each section as has been defined in the template. You can either use the template, rename it, and cut-and-paste your paper from other document(s) into the template, or you can use your document, open style organizer (Format – Style and then click “organizer”), delete all your styles and import the styles from the template.
If you use the template, do not forget to disable the line number on the Top section of the first page before you submit the paper and cancel instructions comments (in brackets and italic fonts).
If you use LaTeX
Please use the LaTeX template you can download from the conference website. In the compressed folder, you will find:
• format_guide.tex: a fill-in form for a standard article with usage comments. Please copy it to a new file with a new name and use it as the basis for your article.
• reference.bib: is a plain text containg the database of the references used for the format guide. Please use the same entries included in this file for your database.
• BSN2020-Nordic.bst: is the bibliography style of the confernce proceedings.
Submission instruction
- To enable the blind review process please do not include your name and affiliation on the draft submitted for review.
- Please convert your entire document to PDF format.
- An additional doc/latex version of the manuscript can be optionally added. In this case a single .zip file including both the .pdf and the doc/latex files of your contribution shall be uploaded.
- Papers must be 6 to 8 pages long.
- You can use BSN2020 followed by your submission ID as your file name, but please do not use special characters, umlaute, etc.
- The maximum file size is 10 MB, but please use vector graphics where possible to reduce your file size.
If your paper has not met all the requirements for submission, your file will not be processed for review and you will be requested to resubmit.
Conclusion
This paper has shown how to prepare a paper for submission to BuildSim-Nordic 2022 Conference.
Acknowledgement
This document is a summary and a modification of various documents from previous Building Simulation Conferences.
References
(Examples for journal papers reference style) Chu, S. and A. Majumdar (2012). Opportunities and challenges for a sustainable energy future. Nature 488, 294–303.
Clarke, J. (2015). A vision for building performance simulation: a position paper prepared on behalf of the IBPSA Board. Journal of Building Performance Simulation 8(2), 39–43.
AuthorFamilyName, AuthorNameInitials. (year). Title. Journal Volume(Issue), StartPage-EndPage.
(Examples for conference papers)
Monarim, F., & Strachan, P. (2014) Coupling stochastic methods and detailed dynamic simulation programs for model calibration: two preliminary case studies. Proceedings from BSO2014: Building Simulation and Optimisation Conference. London (UK), 23-24 June 2014.
AuthorFamilyName, AuthorNameInitials. (year). Title. Proceedings from ConferenceName. City (Country), Dates.
(examples for books and chapters in books)
Hensen, J.L.M., Lamberts R. (edited by). (2011). Building Performance Simulation for Design and Operation. Routledge. London (UK).
Mahdavi A. (2011). People in Building Performance Simulation. In Hensen, J.L.M., Lamberts R. Building Performance Simulation for Design and Operation. Routledge. London (UK).
AuthorFamilyName, AuthorNameInitials. (year). BookTitle. PublishingHouse. City (Country).
AuthorFamilyName, AuthorNameInitials. (year). ChapterTitle. In AuthorFamilyName, AuthorNameInitials. BookTitle. PublishingHouse. City (Country).
(Examples for techical standards)
International Organisation for Standardisation (2017). Energy performance of buildings — Sensible and latent heat loads and internal temperatures — Part 1: Generic calculation procedures (ISO 52017-1).
OrganizationName (year). Title.
Figure 2: The author will be required to accept these conditions when they submit their paper via the web site. Please DO NOT include this disclaimer in your paper. You will be required to accept these conditions when you submit your paper via the web site.
them to potential site visitors. It might say something like this:
Hi there! I’m a bike messenger by day, aspiring actor by night, and this is my website. I live in Los Angeles, have a great dog named Jack, and I like piña coladas. (And gettin’ caught in the rain.)
…or something like this:
The XYZ Doohickey Company was founded in 1971, and has been providing quality doohickeys to the public ever since. Located in Gotham City, XYZ employs over 2,000 people and does all kinds of awesome things for the Gotham community.
As a new WordPress user, you should go to your dashboard to delete this page and create new pages for your content. Have fun!